Ok, I am using the IBO Pipeline now, but am still getting the same
results. My master-detail relationship is giving me:

Master 1
Child 1
Child 2
Child 3

Instead of
Master 1
Child 1
Master 2
Child 2

You can setup a simple example by getting a master-detail
relationship. Put a subreport in the detail band and attach to the
child pipeline. Just above the subreport, add a master dbtext field
to set a relationship and you see what I am getting.

Any thoughts?

--- In IBObjects@yahoogroups.com, "chris_michalec <Cmich22@a...>"
<Cmich22@a...> wrote:

> Through some digging and commenting out, I believe I was able to

take

> it back to Delphi 5. It was as you said, switching the Variants to
> System. However, my original still persists. However, I think I
> have narrowed to an RB issue (most likely setup on my part), so I

am

> going to move this discussion back there. I appreciate ya'll
> pointing me to the IBO Pipeline. I'd much rather use the IB_query
> component the TDataset descendents.
>
> Thanks,
>
>
> --- In IBObjects@yahoogroups.com, "Brian K. Woods" <brian@e...>

wrote:

> > > -----Original Message-----
> > > From: chris_michalec <Cmich22@a...> [mailto:Cmich22@a...]
> > > Sent: Monday, January 13, 2003 4:05 PM
> > > To: IBObjects@yahoogroups.com
> > > Subject: Re: [IBO] IBO and ReportBuilder`
> > >
> > >
> > > I have looked at these components and they all seem to be for
> Delphi
> > > 6.0. Are there any for Delphi 5.0? I have tried installing the
> > > packages, but they don't seem to be backwards compatible.
> >
> > I did the conversion a few months back, when I was looking at the
> RB demo. I
> > recall it seeming to work fine.
> > However, I've had to reinstall since then ( Murphy ate my hard
> drive ), and
> > I didn't
> > reload Report Builder since we decided to go with FastReport and
> not buy RB.
> > However, if I remember correctly, the conversion to Delphi 5 was
> the usual
> > trivial commenting out
> > of the variants unit, etc that you find in any delphi 6 package.

I

> have
> > never downloaded
> > a delphi 6 package that took more than 5 minutes to get running

in

> Delphi 5,
> > as there
> > are really only a few differences. If you can't get it working,
> let me
> > know, and I'll
> > *try* to find time to put the RB demo back in and take a look at

it

> for you.
> >
> > If anyone else out there has converted the IBOPipeline components
> to Delphi
> > 5, this is your chance to
> > help ol' Chris out...
> >
> > Brian