Yes, Delphi 6 running on W2K with SP2.

I haven't had the time to investigate but I think the problem shows up where
I have frames with datasets and controls and I then use those frames within
other frames. Delphi simply crashes when either the application is run or
the form with the frame within a frame is displayed in the development
environment.. I have tried doing a complete reinstall of IBO4.2Eb and the
problem remains. Going backwards by doing a complete reinstall of IB4.2Ea
is fine so it is pretty clear it is something introduced by 4.2Eb. I will
get more time over the the next couple of days so I will look at it further
but I "think" it is related to the TIB_LookupCombo. I use the word think
because I haven't proved it yet so it may not be correct. Some work was
done on the lookup combi in version 4.2Eb but it is dangerous to guess. I
am however pretty sure that the problem is something introduced into 4.2Eb.

----- Original Message -----
From: "Paulo Henrique Albanez" <pha@...>
To: <IBXbjects@yahoogroups.com>
Sent: Friday, August 17, 2001 12:21 PM
Subject: Re: [IBO] Problem with the version 4_2_Eb


> Did you compile with Delphi 6?
>
> My English is very bad, because of this I don't manage to explain better.
>
> There is one more person with the same problem. The original email
>
> From: Martin Lunt
> To: IBObjects@yahoogroups.com
> Sent: Thursday, August 16, 2001 4:29 PM
> Subject: RE: [IBO] IBO4 Version Eb Installation problem
>
> Jason
>
> I think the man may be correct and that it may have to do with the
> TIB_LookupCombo component. My application ran fine under 4.2Ea but under
> 4.2Eb Delphi crashes without any error messages if I try so much as to
view
> a frame containing a TIB_LookupCombo within the development environment.
>
> My application (which is an MDI one) uses a lot of frames and all of the
> lookup combos are within frames (or within frames within frames). It
> "seems" that any of the MDIChild forms which have the TIB_LookupCombo
> exhibit this problem.
>
> If you need any further info or would like me to try and put together an
> example please advise.
>
> Martin
>
>
> PHA
> Nova Odessa / SP - Brazil
>
> ----- Original Message -----
> From: Jason Wharton
> To: IBObjects@yahoogroups.com
> Sent: Thursday, August 16, 2001 11:09 PM
> Subject: Re: [IBO] Problem with the version 4_2_Eb
>
>
> I got lost where you say to "try to change the field state".
>
> I've fiddled around with this as much as I can but your stated problem
will
> not duplicate for me.
>
> I agree there appears to be a weird flicker but it isn't freezing or
going
> crazy on me as you state.
>
> Please clarify things here so I am not running a wild-goose chase.
>
> Thanks,
> Jason Wharton
> CPS - Mesa AZ
> http://www.ibobjects.com
>
>
> ----- Original Message -----
> From: "Paulo Henrique Albanez" <pha@...>
> To: <IBXbjects@yahoogroups.com>
> Sent: Thursday, August 16, 2001 11:32 AM
> Subject: Re: [IBO] Problem with the version 4_2_Eb
>
>
> > Using your example Contact.
> >
> > - compile using Delphi 6.
> > - run
> > - open the table
> > - try to change the field state
> >
> > The application freezes.
> >
> >
> >
> > IBO 4.2.Eb
> > Delphi 6 Progessional
> > Windows 2000 Professional Pack 2
> >
> > PHA
> > Nova Odessa / SP - Brazil
> >
> > ----- Original Message -----
> > From: Jason Wharton
> > To: IBObjects@yahoogroups.com
> > Sent: Thursday, August 16, 2001 2:58 PM
> > Subject: Re: [IBO] Problem with the version 4_2_Eb
> >
> >
> > > Doesn't exist steps, if this component is present in form,
> > > the application freezes or aborts.
> >
> > If it is so simple, why not please me by giving me a few simple
steps?
> > I will try to assume what you mean exactly.
> >
> > Yes, I am trying to train you as if you were an employee of my
> company...
> > I've been at this long enough to know what saves me a heck of a lot
of
> time.
> > That is time saved we all benefit from.
> >
> > Jason Wharton
> > CPS - Mesa AZ
> > http://www.ibobjects.com
>
>
>
>
> Yahoo! Groups Sponsor
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>