Glad you got it!

Does seem rather strange to me...

Regards,
Jason Wharton
CPS - Mesa AZ
http://www.ibobjects.com

----- Original Message -----
From: "Stephen Lee-Woolf" <s.lee-woolf@...>
Newsgroups: egroups.ibobjects
To: <IBObjects@yahoogroups.com>
Sent: Tuesday, April 30, 2002 12:31 AM
Subject: Re: [IBO] 4.2H Installation Problems


> Thanks Jason, I'd tried that and found nothing.
>
> Finally cracked it last night - had to copy ALL the BPLs into the
> system32 directory (not just the run-times) and it worked.
>
> Steve
>
> In article <011c01c1ef9c$1f7fcb50$dc756a41@CX170673E>,
> jwharton@... says...
> > Please do a disk-wide search for rogue BPL files. That is the only thing
I
> > can think of that may be messing you up.
> >
> > Jason Wharton
> > CPS - Mesa AZ
> > http://www.ibobjects.com
> >
> >
> > ----- Original Message -----
> > From: "Stephen Lee-Woolf" <s.lee-woolf@...>
> > Newsgroups: egroups.ibobjects
> > To: <IBObjects@yahoogroups.com>
> > Sent: Monday, April 29, 2002 1:16 AM
> > Subject: [IBO] 4.2H Installation Problems
> >
> >
> > > I have just tried (a copule of times) to replace my 4.0 installation
> > > with 4.2H and am having a few problems. The steps I have taken so far
> > > are:
> > >
> > > 1. Uninstalled all packages from component list
> > > 2. Removed all obsolete palettes
> > > 3. Deleted all files/subdirectories in the IBObjects root directory
(c:
> > > \d6tools\ibobjects)
> > > 4. Deleted all ibo .BPL files from bpl directory.
> > > 5. Checked presence of source and bpl directories in both browse and
> > > search paths.
> > > 6. Unzipped new release into IBObjects root directory.
> > > 7. Opened project file and done a build-all. No errors or warnings
> > > generated. .bpl files correctly generated in proper place.
> > > 8. Attempted to install design-time packages. IBO40CDT_D6,
IBO40ADT_D6,
> > > IBO40WDT_D6 and IBO40WXDT_D6 all worked fine. IBO40TDT_D6,
IBO40VDT_D6,
> > > IBO40FDT_D6 and IBO40XDT_D6 all failed with the same error messages:
> > > a. The procedure entry point@ib_metadata@initialization$qqvr could not
> > > be located in the dynamic link linrary <filename>.
> > > b. Can't load package <filename>. The specified procedure could not be
> > > found.
> > >
> > > in each case <filename> was appropriate .BPL file for the module. ALL
> > > these BPL exist in the correct place and were there before the install
> > > attempts.
> > >
> > > The net result is that I have component tabs for iboAccess, iboCore,
> > > iboTools and iboInternet, and nothing else.
> > >
> > > Am I missing something? Can anyone suggest where I go from here?
> > >
> > > Thanks
> > > --
> > > Steve Lee-Woolf
>
> --
> Steve Lee-Woolf
> University of Salford
> Manchester, U.K.