dear all
thank you for all your answer, especially you achim kaiser
now my windows me client can connect to IB 6.0. I really find good support
from this group.

regards

hellen

----- Original Message -----
From: Achim Kaiser <kaiser_achim@...>
To: <ib-support@yahoogroups.com>
Sent: Wednesday, April 24, 2002 7:11 PM
Subject: Re: [ib-support] windows me problem


> Hi Hellen,
> [snip]
> Errnr : 10061 WSAECONNREFUSED
> Connection refused.
> No connection could be made because the target machine actively refused
it.
> This usually results from trying to connect to a service that is inactive
on
> the foreign host - i.e. one with no server application running.
>
> I would check :
> Server :
> 1. Is the Firebird-Server running ?
> 2. Check the HOST file (no extention !!)
> for a entry :
>
> 192.168.80.XX Firebird-Client
> IP and Clientname depend on your network
>
> 3. Check the SERVICES file (no extention !!)
> for a entry :
>
> gds_db 3050/tcp # Firebird/InterBase Server
>
> if it is the last entry make shure there follows
> a linefeed after the entry
>
> 4. Make shure there is no firewall running
> that blocks the port 3050.
> 5. Check the subnet-entries in your network-settings.
> Make shure that Server and Client have similar entries.
> 6. Check log-file for new error-entries
> 7. make shure there is only one gds32.dll available
>
> Client :
> 1. Check the HOST file (no extention !!)
> for a entry :
>
> 192.168.80.10 Firebird-Server-Name
> IP and Servername depend on your network
>
> 3. Check the SERVICES file (no extention !!)
> for a entry :
>
> gds_db 3050/tcp # Firebird/InterBase Server
>
> if it is the last entry make shure there follows
> a linefeed after the entry
>
> 4. Make shure there is no firewall running
> that blocks the port 3050.
> 5. Check the subnet-entries in your network-settings.
> Make shure that Server and Client have similar entries.
> 6. On ME turn off the SystemRecoveryFunction
> 7. Check log-file for new error-entries
> 8.make shure there is only one gds32.dll available
>
> For more information refer the Operation Guide (OPGuide)
> page 78 ff.
>
> For connection use :
> Servername:Server_drive:\Serverpath\Data.GDB
> (drive and path on the server !!!! )
> Don´t use mapped drives.
>
> then it should work
>
> HTH
> Achim
>
>
>
>
>
>
> To unsubscribe from this group, send an email to:
> ib-support-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>