I tried a fields[4].ReadOnly and it wouldn't let me - must be a TIB_ thing.

Regards
Paul

> -----Original Message-----
> From: IBObjects@yahoogroups.com
> [mailto:IBObjects@yahoogroups.com] On Behalf Of Roger Vellacott
> Sent: 05 June 2006 16:07
> To: IBObjects@yahoogroups.com
> Subject: RE: [IBO] Updating left outer join
>
> I just loop through the fields...
>
> for i := 0 to Q.FieldCount-1 do
> Fields[i].ReadOnly := False;
>
> We use mostly TIBOQuery, rather than TIB_, but I don't think
> this affects the ReadOnlyness of ReadOnly.
> We do not use persistent fields. All fields are created on
> opening the query.
>
>
> Roger Vellacott.
>
>
>
> -----Original Message-----
> From: Paul Hope [mailto:paulhope@...]
> Sent: 05 June 2006 15:55
> To: IBObjects@yahoogroups.com
> Subject: RE: [IBO] Updating left outer join
>
>
>
> Hi Roger
>
> I think you are saying that if the Field ReadOnly is set back
> to false then it doesn't matter what is in UpdateSQL. I
> tried setting FieldByName('').ReadOnly to false but it wont
> compile - ReadOnly is a read-only property - how do you do yours?
>
> I also tried putting 'select 1 from rdb$database' into
> UpdateSQL but it makes the field ReadOnly. I had assumed
> that IBO looked for field names in the UpdateSQL and made
> those editable. It would be nice to get rid of the rec=-1.
>
> Regards
> Paul
>
>
> > -----Original Message-----
> > From: IBObjects@yahoogroups.com
> > [mailto:IBObjects@yahoogroups.com] On Behalf Of Roger Vellacott
> > Sent: 05 June 2006 15:07
> > To: IBObjects@yahoogroups.com
> > Subject: RE: [IBO] Updating left outer join
> >
> > Jason's release note for version 4.3Ac says the following:
> >
> > "I fixed a bug in the handling of TField objects in the
> > InternalSetFieldData method. I thought I was checking the field's
> > ReadOnly property to prevent the setting when appropriately
> but due to
> > the way the variable reference scope was it was mistakenly
> reading the
> > dataset's ReadOnly property instead. Thus, I was allowing fields
> > marked as read only to be modified. It will now raise an
> exception as
> > it should."
> >
> >
> >
> > In other words, previous versions did not mark joined fields as
> > ReadOnly fields, so it was much easier to customise the update
> > process, with separate DSQLs, code in the BeforePost event,
> etc etc.
> > We now have to circumvent the new behaviour by routinely looping
> > through all fields setting ReadOnly off in the AfterOpen
> event, but,
> > even so, IBO seems to reimpose the ReadOnly properties from time to
> > time. This makes it much more difficult to create a
> reliable system
> > in which joined fields, or
> > other normally "readonly" fields, are editable by the user.
> >
> >
> >
> > It used to be possible to make a computed field editable,
> and respond
> > to user edits by updating the fields or the tables from
> which it was
> > computed. This no longer works, as IBO will not allow
> ReadOnly to be
> > switched off on computed fields. It will, however, allow
> editing of
> > Calculated Fields.
> >
> >
> >
> > I can see the logic of setting ReadOnly on such fields by default -
> > especially where joined tables are displayed in editable
> grids, but it
> > would be much more stable for those of us who want to control the
> > editing and updating process if we could switch this
> behaviour off -
> > perhaps with a new property of TIB_Statement. Any chance of this
> > Jason?
> >
> >
> >
> > By the way, we have an empty stored procedure called
> DO_NOTHING, so we
> > can set EditSQL etc to say "EXECUTE PROCEDURE DO_NOTHING",
> in order to
> > persuade IBO that the update has been completed. This
> would be much
> > faster than your "where rec = -1".
> >
> >
> >
> > Roger Vellacott
> >
> > Passfield Data Systems Ltd.
> >
> >
> >
> >
> >
> > <?xml:namespace prefix = o ns =
> > "urn:schemas-microsoft-com:office:office" />
> >
> > -----Original Message-----
> > From: Paul Hope [mailto:paulhope@...]
> > Sent: 05 June 2006 14:25
> > To: IBObjects@yahoogroups.com
> > Subject: RE: [IBO] Updating left outer join
> >
> >
> > I solved it using OnCustomEdit and a separate DSQL. Problem was I
> > could
> > not edit the grid without the EditSQL in place, so I left
> it there and
> > crippled it with 'where rec = -1'.
> >
> > This raises two questions
> >
> > Should IBO have supported what I was doing below?
> >
> > How do you use OnCustomEdit, make the grid editable and not have a
> > crippled statement in the InsertSQL?
> >
> > Regards
> > Paul
> >
> > > -----Original Message-----
> > > From: IBObjects@yahoogroups.com
> > > [mailto:IBObjects@yahoogroups.com] On Behalf Of Paul Hope
> > > Sent: 05 June 2006 13:09
> > > To: IBObjects@yahoogroups.com
> > > Subject: RE: [IBO] Updating left outer join
> > >
> > > Hi Helen
> > >
> > >
> > > > -----Original Message-----
> > > > From: IBObjects@yahoogroups.com
> > > > [mailto:IBObjects@yahoogroups.com] On Behalf Of Helen Borrie
> > > > Sent: 05 June 2006 12:57
> > > > To: IBObjects@yahoogroups.com
> > > > Subject: Re: [IBO] Updating left outer join
> > > >
> > > > At 09:42 PM 5/06/2006, you wrote:
> > > > >Hi
> > > > >
> > > > >I have this query connected to a grid
> > > > >
> > > > >select s.rec,s.shipment,s.whs,s.pid,s.qty,s.alloc,w.description
> > > > >from (warehouses w left outer join shipment_allocations s
> > > > > on s.whs=w.ref and s.shipment=:shipment and s.pid=:pid)
> > > > >
> > > > >in the EditSQL I have
> > > > >
> > > > >execute procedure shipment_alloc_edit(:shipment,:pid,:qty,:whs)
> > > > >
> > > > >:shipment comes from MasterParams and MasterSource :qty is
> > > > entered in
> > > > >the grid :pid is set in code AfterPrepare (ParamByName) :whs
> > > > is one of
> > > > >the fields extracted in the SQL
> > > > >
> > > > >When I look at the SQLMonitor I see that when the query is
> > > > opened both
> > > > >:shipment and :pid are correctly set. However when the
> > > InsertSQL is
> > > > >executed :shipment and :qty are set, but :pid and :whs
> are null.
> > > > >
> > > > >How can I persuade it to pick up :pid and :whs?
> > > >
> > > > Try improving the syntax for the main query:
> > > >
> > > > select s.rec,s.shipment,s.whs,s.pid,s.qty,s.alloc,w.description
> > > > from warehouses w
> > > > left outer join shipment_allocations s
> > > > on s.whs=w.ref
> > > > WHERE s.shipment=:shipment and s.pid=:pid
> > > >
> > > > Helen
> > > >
> > > That breaks it, I always want the grid populated with fields from
> > > warehouses even when there is no data in shipment_allocations.
> > > Changing it as you suggest returns no rows ;-(
> > >
> > > Regards
> > > Paul
> > >
> >
>
>
>
> ______________________________________________________________
> __________
> ___
> IB Objects - direct, complete, custom connectivity to
> Firebird or InterBase
> without the need for BDE, ODBC or any other layer.
> ______________________________________________________________
> __________
> ___
> http://www.ibobjects.com <http://www.ibobjects.com> - your
> IBO community resource for Tech Info papers,
> keyword-searchable FAQ, community code contributions and more !
>
>
>
>
>
> SPONSORED LINKS
> Resume database software Membership database software
> Inventory database software
> Database development software Database software Customer
> database software
>
> _____
>
> YAHOO! GROUPS LINKS
>
>
>
> * Visit your group " IBObjects
> <http://groups.yahoo.com/group/IBObjects> " on the web.
>
>
> * To unsubscribe from this group, send an email to:
> IBObjects-unsubscribe@yahoogroups.com
> <mailto:IBObjects-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service <http://docs.yahoo.com/info/terms/> .
>
>
> _____
>
>
>
>
> ------------------------ Yahoo! Groups Sponsor
> --------------------~--> You can search right from your
> browser? It's easy and it's free. See how.
> http://us.click.yahoo.com/_7bhrC/NGxNAA/yQLSAA/PhFolB/TM
> --------------------------------------------------------------
> ------~->
>
> ______________________________________________________________
> _____________
> IB Objects - direct, complete, custom connectivity to
> Firebird or InterBase
> without the need for BDE, ODBC or any other layer.
> ______________________________________________________________
> _____________
> http://www.ibobjects.com - your IBO community resource for
> Tech Info papers,
> keyword-searchable FAQ, community code contributions and more
> !
> Yahoo! Groups Links
>
>
>
>
>
>