I did a fresh install of D6 and IBO on a 233mhz P2 machine. The dwell is
also noticeable on this machine, but is much less than on my main computer.
I suspect that my computer is is starting to bog down due to too many
applications having been installed over the last couple years.

It is still a mystery why the compiler pauses on the IBO units, and not on
any other 3rd party components I have.

Paul

----- Original Message -----
From: "Paul Gallagher" <paul@...>
To: <IBObjects@yahoogroups.com>
Sent: Monday, December 31, 2001 10:20 AM
Subject: Re: [IBO] Slow Build


> Thanks. At least I know it is something specific to my system.
>
> ----- Original Message -----
> From: "John Tomaselli" <jrt@...>
> To: <IBObjects@yahoogroups.com>
> Sent: Monday, December 31, 2001 9:56 AM
> Subject: RE: [IBO] Slow Build
>
>
> > I tried your test and did not experience any problems.
> > HTH
> > John
> >
> > -----Original Message-----
> > From: Paul Gallagher [mailto:paul@...]
> > Sent: Monday, December 31, 2001 10:31 AM
> > To: IBObjects@yahoogroups.com
> > Subject: Re: [IBO] Slow Build
> >
> >
> > Yes, I have rebuilt and double checked that I have all current files
> several
> > times. I have another computer, a 233mhz P2, and I will install D6 and
IBO
> > on there to see what happens. The difference could be the faster
> processor(I
> > doubt it though).
> >
> > I was curious what motherboard and processors you are running. I am
> thinking
> > about getting an Abit VP6 with dual 1ghz P3's. I currently have an Abit
> BP6,
> > but it only supports up to the cerleron 533mhz PPG chips.
> >
> > I just checked again, and when I run my system at 500mhz, the delay on
the
> > IB_Dialogs unit is about 2 seconds. So if we had the same problem, even
at
> > 700, the delay should be quite noticeable. It's more than enough delay
to
> > easily read the line number and module on the progress window.
> >
> > Sometimes these "little" issues are the ones that drive you nuts. I have
a
> > style(or lack there of) of programming that forces me to change code and
> > re-run continuously, so the delay is quite annoying. It actually takes
> > longer to look at the IB_Dialog unit than it does to compile the other
10k
> > lines of code. And since it is also causing the problem of the IDE
> freezing
> > periodically, it is really maddening.
> >
> > I wonder if there is any other lower level function to look at compiler
> > progress to try and pinpoint the problem?
> >
> > Thanks,
> > Paul
> >
> > ----- Original Message -----
> > From: "Geoff Worboys" <geoff@...>
> > To: "Paul Gallagher" <IBObjects@yahoogroups.com>
> > Sent: Monday, December 31, 2001 1:23 AM
> > Subject: Re: [IBO] Slow Build
> >
> >
> > > > If someone wants to try this, just create a new project, drop a
> > > > IB_BrowseDialog on the form, and perform a build.
> > >
> > > I've tried various setups and compiles and builds here and I cannot
> > > reproduce any noticeable delay with IB_BrowseDialog. I guess the
> > > other factor could be that I am running on a dual 700MHz system which
> > > may make a difference.
> > >
> > > Have you gone in and done a full rebuild of the IBO packages, to be
> > > sure you have no date descrepencies between files? Just wondering
> > > that may be making Delphi do more searching.
> > >
> > > --
> > > Geoff Worboys
> > > Telesis Computing
> > >
> > >
> > >
> > >
> >
>
___________________________________________________________________________
> > > IB Objects - direct, complete, custom connectivity to Firebird or
> > InterBase
> > > without the need for BDE, ODBC or any other layer.
> > >
> >
>
___________________________________________________________________________
> > > http://www.ibobjects.com - your IBO community resource for Tech Info
> > papers,
> > > keyword-searchable FAQ, community code contributions and more !
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
> >
> >
> >
> >
>
___________________________________________________________________________
> > IB Objects - direct, complete, custom connectivity to Firebird or
> InterBase
> > without the need for BDE, ODBC or any other layer.
> >
>
___________________________________________________________________________
> > http://www.ibobjects.com - your IBO community resource for Tech Info
> papers,
> > keyword-searchable FAQ, community code contributions and more !
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
> >
>
___________________________________________________________________________
> > IB Objects - direct, complete, custom connectivity to Firebird or
> InterBase
> > without the need for BDE, ODBC or any other layer.
> >
>
___________________________________________________________________________
> > http://www.ibobjects.com - your IBO community resource for Tech Info
> papers,
> > keyword-searchable FAQ, community code contributions and more !
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>
>
>
___________________________________________________________________________
> IB Objects - direct, complete, custom connectivity to Firebird or
InterBase
> without the need for BDE, ODBC or any other layer.
>
___________________________________________________________________________
> http://www.ibobjects.com - your IBO community resource for Tech Info
papers,
> keyword-searchable FAQ, community code contributions and more !
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>